Home The Cooperative Way Making Electricity Delivering Electricity Saving Electricity Learn About About Us

Pictured above is a common power pole used for 69-kV and 115-kV lines, typical of the power lines Great River Energy builds. The large lattice towers shown at the bottom of the page are rarely used any longer.

Power poles

Most of the power lines that Great River Energy builds are 69-kV or 115-kV lines, and are much smaller than landowners expect at first. The large lattice towers that often come to mind are rarely used any longer.

The type of transmission structures used for any project is determined by the characteristics of the transmission line's route, including terrain and existing infrastructure. The illustrations below show typical transmission poles and structures, starting with the smaller structures Great River Energy typically uses and ending with very large towers.

Transmission lines are like freeways

A transmission line is a set of wires, called conductors, that carries electricity from power plants to substations. When you think of the power line system that delivers electricity to you, think of the large transmission lines as interstate freeways with the distribution lines that carry electricity to homes, farms and businesses being the smaller state or county highways. View an illustration of how electricity gets from power plants to you.

Secondary roads: 69 kV through 23 kV

The 69-kV through 23-kV systems transmit power to the distribution substations throughout the Great River Energy system. These lines also provide connection to some of the more remote and sparsely populated areas in the Great River Energy service territory. Many of the smaller rural industrial and larger commercial customers of Great River Energy’s member cooperatives receive their power directly from these systems. Great River Energy operates nearly 3,000 miles of transmission line that operate at 69 kV line or less.

Transmission nominal voltage: 69 kV

Type: Single pole

Typical height: 50 to 70 feet
Typical right of way width: 70 to 100 feet

State highways: 161 kV and 115 kV

The 161-kV and 115-kV system is the workhorse of the transmission system. It is responsible for transmitting power from the larger transmission system and generation facility throughout the entire service area. 161-kV and 115-kV transmission lines are the main arteries for electricity, carrying it to and from every geographical area Great River Energy serves. Some large industrial customers are served directly from the 115-kV transmission system. Great River Energy currently operates approximately 30 miles of 161-kV transmission lines and 300 miles of 115-kV transmission lines, connecting more than 60 substations.

Transmission nominal voltage: 161 kV

Type: Single pole

Typical height: 70 to 95 feet

Typical right of way width: 100 to150 feet

Transmission nominal voltage: 115 kV

Type: Single pole

Typical height: 55 to 80 feet

Typical right of way width: 90 to 130 feet

Interstate highways: 345 kV and 230 kV

The 345-kV and 230-kV systems provide the backbone of a transmission system. These transmission lines are the main connection for reliability purposes between Great River Energy’s service area and the region’s bulk power systems. They also provide connections from the DC line and Great River Energy’s other large generating facilities. By operating transmission lines at such a high voltage, line losses and voltage drops can be minimized while the lines deliver large amounts of energy to customers throughout the system.

Transmission nominal voltage: 345 kV
Type: Double circuit pole

Typical height: 115 to150 feet
Typical right of way width: 140 to160 feet

Transmission nominal voltage: 230 kV

Type: H-frame

Typical height: 60 to 90 feet

Typical right of way width: 100 to160 feet

The super highway: +/-400 kV DC and 500 kV

The 400 kV and 500 kV transmission lines are the super highways in the Great River Energy system, although large lattice towers such as these are rarely used any longer. Some 1,000 megawatts of electricity can flow across Great River Energy’s 400 kV transmission line that runs 435 miles from Coal Creek Station, in central North Dakota, to Minnesota. Only electricity generated at Coal Creek Station and then converted into DC at the plant’s converter station can flow across the HVDC, or high-voltage direct current, line. More than 1,600 lattice steel towers carry the HVDC transmission line across both states. Once in Minnesota, the DC power is converted to back to alternating current (AC) power and sent along the local transmission systems for use in Minnesota homes and businesses. Great River Energy also operates 70 miles of 500 kV transmission lines.

Transmission nominal voltage: +/- 400 kV HVDC

Type: Tower

Typical height: 145 to 180 feet

Typical right of way width: 160 to180 feet

Transmission nominal voltage: 500 kV

Type: Tower

Typical height: 90 to 150 feet

Typical right of way width: 160 to 200 feet

Privacy |  Terms |  Site Map